Back to group list

Back to LOVAG Public Test Decisions Database Group type of document list

LOVAG Public Test Decisions Database GROUP | LOVAG TEST DECISIONS DATABASE

Consultation & Downloading

Click on the document for preview:
  • 1*: [x] Documents needed for the next meeting
  • 2*: [✓] Tick case for downloading
  • Red printing: newly available or updated documents published within the last three months

Search document

Error: select one or more document.
Done: You file will be sent for downloading.

Document table

Save selected files
1* Document owner Reference number Issuing date Upload date Status Category Standards Title 2* Download
▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ ▲ ▼ all
  LOVAG TC LDS040 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 2.1.1.2 Partially type-tested low-voltage and controlgear assembly (PTTA)
  LOVAG TC LDS041 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.3 Temperature rise
  LOVAG TC LDS045 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5.2.1.2 Refer to Standard
  LOVAG TC LDS044 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5.2.1.1 Refer to Standard
  LOVAG TC LDS042 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5 Short-circuit protection and short-circuit withstand strength.
  LOVAG TC LDS043 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5.2 Information concerning the short-circuit withstand strength
  LOVAG TC LDS046 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5.4 Co-ordination of short-circuit protective devices. (SCPDs)
  LOVAG TC LDS048 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.1 General
  LOVAG TC LDS049 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.2 Arrangement of the ASSEMBLY
  LOVAG TC LDS051 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.4 Temperature-rise test using heating resistors with an equivalent power loss
  LOVAG TC LDS052 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.5 Measurement of temperatures
  LOVAG TC LDS053 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.7 Results to be obtained
  LOVAG TC LDS047 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 7.5.5 Circuits within an ASSEMBLY
  LOVAG TC LDS050 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.1.3 Temperature-rise test using current on all apparatus.
  LOVAG TC LDS054 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.3.2.1 Test arrangements
  LOVAG TC LDS055 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.3.2.2 Performance of the test: General
  LOVAG TC LDS058 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.3.2.5 Results to be obtained
  LOVAG TC LDS056 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.3.2.3 Testing of the main circuits
  LOVAG TC LDS057 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.3.2.4 Value and duration of the short-circuit current Refer to Standard and G.
  LOVAG TC LDS059 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.4.1 Verification of the effective connection between the exposed conductive parts of the ASSEMBLY
  LOVAG TC LDS060 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.4.2 Verification of the short-circuit strength of the protective circuit by test.
  LOVAG TC LDS061 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.4.3 Results to be obtained
  LOVAG TC LDS062 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.5 Verification of clearances and creepage distances.
  LOVAG TC LDS063 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.7 Verification of degree of protection
  LOVAG TC LDS064 2013/09/12 2019-06-25 Approved POW IEC 60439-1:2004 8.2.8 EMC tests
  LOVAG TC LDS065 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 10.3 Degree of protection of enclosures
  LOVAG TC LDS066 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G/J 10.12.2. ASSEMBLIES incorporating electronic circuits
  LOVAG TC LDS001 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2 Type Tests for constructional requirements
  LOVAG TC LDS002 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.4 Mechanical properties of terminals
  LOVAG TC LDS003 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5 Strength of actuator mechanism
  LOVAG TC LDS004 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5.1 Condition of equipment for tests
  LOVAG TC LDS005 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5.2 Method of test
  LOVAG TC LDS006 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5.3 Condition of equipment during and after test
  LOVAG TC LDS007 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5.3.1 Dependent and independent manual operation
  LOVAG TC LDS008 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.2.5.3.2 Dependent and independent powered operation
  LOVAG TC LDS009 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3 Type tests for performance
  LOVAG TC LDS010 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.1 Test sequences
  LOVAG TC LDS011 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.2 General test conditions
  LOVAG TC LDS013 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.3 Test sequence I: General performeance characteristics
  LOVAG TC LDS012 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.2.1 General requirements
  LOVAG TC LDS015 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.3.3.3 Transient recovery voltage
  LOVAG TC LDS014 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.3.1 Temperature-rise
  LOVAG TC LDS016 2011 2019-07-09 Approved POW IEC 60947-3:2008 8.3.3.4 Dielectric verification
  LOVAG TC LDS016 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.3.4 Dielectric verification
  LOVAG TC LDS017 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.3.5 Leakage current
  LOVAG TC LDS018 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.4 Test sequence II: Operational performance capability
  LOVAG TC LDS019 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.4.2 Dielectric verification
  LOVAG TC LDS020 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.4.3 Leakage current
  LOVAG TC LDS021 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.5 Test sequence III
  LOVAG TC LDS022 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.5.1.3 Calibration of the test circuit
  LOVAG TC LDS023 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.5.2.4 Test procedure
  LOVAG TC LDS024 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.6 Test sequence IV
  LOVAG TC LDS025 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.7 Test Sequence V: Overload performance capability
  LOVAG TC LDS026 2011 2019-07-09 Archived POW IEC 60947-3:2008 8.3.7.1 Overload Test
  LOVAG TC LDS027 2011 2019-07-09 Archived POW IEC 60947-3:2008 A.10.1.1 Mechanical durability test
  LOVAG TC LDS028 2011 2019-07-09 Archived POW IEC 60947-3:2008 A.10.1.3 Test procedure
  LOVAG TC LDS029 2011 2019-07-09 Archived POW IEC 60947-3:2008 A.10.1.4 Results to be obtained
  LOVAG TC LDS030 2011 2019-07-09 Archived POW IEC 60947-3:2008 A.3 Making and breaking capacities
  LOVAG TC LDS031 2011 2019-07-09 Archived POW IEC 60947-3:2008 G.8.3.2.2.2 Tolerances on test quantities
  LOVAG TC LDS032 2011 2019-07-09 Archived POW IEC 60947-3:2008 G.8.3.2.2.3 Recovery voltage
  LOVAG TC LDS033 2012 2019-07-10 Approved INST IEC 62208:2011 6.2 Documentation
  LOVAG TC LDS034 2012 2019-07-10 Approved INST IEC 62208:2011 9.1 General conditions of tests
  LOVAG TC LDS035 2012 2019-07-10 Approved INST IEC 62208:2011 9.13 Resistance to corrosion
  LOVAG TC LDS036 2012 2019-07-10 Approved INST IEC 62208:2011 9.14 Thermal power dissipation capability
  LOVAG TC LDS037 2012 2019-07-10 Approved INST IEC 62208:2011 9.7 Degree of protection against external mechanical impacts (IK Code)
  LOVAG TC LDS038 2012 2019-07-10 Approved INST IEC 62208:2011 9.8 Degree of protection (IP Code)
  LOVAG TC LDS039 2012 2019-07-10 Approved INST IEC 62208:2011 9.9.3 Resistance to abnormal heat and to fire
  LOVAG TC LDS067 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.1 General
  LOVAG TC LDS068 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.2 Selection of the representative arrangement
  LOVAG TC LDS069 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.2.1 General
  LOVAG TC LDS070 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.2.3 Functional units
  LOVAG TC LDS071 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.3 Methods of test
  LOVAG TC LDS072 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.3.2 Test conductors
  LOVAG TC LDS073 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.3.3 Measurement of temperatures
  LOVAG TC LDS074 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.10.2.3.8 Results to be obtained
  LOVAG TC LDS075 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.11.5 Verification by test
  LOVAG TC LDS076 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.11.5.1 Test arrangements
  LOVAG TC LDS077 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.11.5.2 Performance of the test - General
  LOVAG TC LDS078 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.11.5.3.4 Connections to the supply side of outgoing units
  LOVAG TC LDS079 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.11.5.3.5 Neutral conductor
  LOVAG TC LDS080 2013-09-12 2019-06-26 Approved POW IEC 61439-2:2011 G10.11.5.4 Value and duration of the short-circuit current
  LOVAG TC LDS081 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G10.2 Strength of materials and parts
  LOVAG TC LDS082 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G9.2 Temperature rise limits
  LOVAG TC LDS083 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G9.3 Short-circuit protection and short-circuit withstand strength.
  LOVAG TC LDS084 2013-09-12 2019-06-26 Archived POW IEC 61439-2:2011 G9.3.2 Information concerning the short-circuit withstand strength
  LOVAG TC LDS085 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.2 Compliance with constructional requirements
  LOVAG TC LDS086 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.2.2 Electrical performance of screwless-type clamping units
  LOVAG TC LDS087 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.2.3 Ageing test for screwless-type clamping units
  LOVAG TC LDS088 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3 Compliance with performance requirements
  LOVAG TC LDS089 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.1 Test sequences
  LOVAG TC LDS090 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.2 General test conditions
  LOVAG TC LDS091 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3 Performance under no load, normal load and overload conditions
  LOVAG TC LDS092 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.1 Operation
  LOVAG TC LDS093 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2 Operating limits
  LOVAG TC LDS094 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.1 Power operated equipment
  LOVAG TC LDS095 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.1.2 Coil power consumption
  LOVAG TC LDS096 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.1.2. Holding power for conventional and electronically controlled electromagnet
  LOVAG TC LDS097 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.1.3 Pole impedance
  LOVAG TC LDS098 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.2 Relays and releases
  LOVAG TC LDS099 2014 2019-07-10 Approved POW IEC 60947-4-1:2012 9.3.3.2.2 a) Operation of under-voltage relays and releases
  LOVAG TC LDS100 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.2 b) Shunt-coil operated releases
  LOVAG TC LDS101 2014 2019-07-10 Archived POW IEC 60947-4-1:2012 9.3.3.2.2 c) Thermal, electronic and time-delay magnetic overload relays
  LOVAG TC LDS102 2015 2019-07-15 Archived POW IEC 60947-1:2007 5.2 Marking
  LOVAG TC LDS103 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.4.3 Testing for damage to and accidental loosening of conductors(flexion test)
  LOVAG TC LDS104 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.4.5 Testing for insert ability of unprepared round copper conductors having the maximum specified cross-section
  LOVAG TC LDS105 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.4.5.1 Test procedure
  LOVAG TC LDS186 2018 2019-07-16 Archived IEC 61439-1: 2011 10.9.1 Dielectric properties
  LOVAG TC LDS106 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.4.5.2 Construction of gauges
  LOVAG TC LDS107 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.5.2.1 Dependent and independent manual operation
  LOVAG TC LDS108 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.2.5.3.1 Dependent and independent manual operation
  LOVAG TC LDS109 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.3.2.2.2 Tolerances on tests quantity
  LOVAG TC LDS110 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.3.2.4 Test report
  LOVAG TC LDS111 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.3.3.4 Dielectric properties
  LOVAG TC LDS112 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.3.3.4.1 Type tests
  LOVAG TC LDS113 2015 2019-07-15 Archived POW IEC 60947-1:2007 8.3.4.1.5 Calibration of the test circuit
  LOVAG TC LDS114 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex A Harmonisation of utilization categories for low-voltage switchgear and controlgear
  LOVAG TC LDS115 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex K Procedure to determine reliability data for electromechanical devices used in functional safety applications
  LOVAG TC LDS116 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex O Environmentally-conscious design
  LOVAG TC LDS117 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex R Application of the metal foil for dielectric testing on accessible parts during operation or adjustment
  LOVAG TC LDS118 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex V Power management with switchgear and controlgear for electrical energy efficiency
  LOVAG TC LDS119 2015 2019-07-15 Archived POW IEC 60947-1:2007 Annex W Procedure to establish material declaration
  LOVAG TC LDS120 2016 2019-07-15 Approved POW IEC 61439-6:2012 G/J 10.12.2.2 ASSEMBLIES incorporating electronic circuits
  LOVAG TC LDS121 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.1 General
  LOVAG TC LDS122 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.2 Selection of the representative arrangement
  LOVAG TC LDS123 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.2.1 General
  LOVAG TC LDS124 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.2.2 Busbar trunking units
  LOVAG TC LDS125 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.2.3 Tap off units
  LOVAG TC LDS126 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.3.3 Measurement of temperatures
  LOVAG TC LDS127 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.3.5 Test of a BT run
  LOVAG TC LDS128 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.3.6 Test of a tap-off unit
  LOVAG TC LDS129 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.10.2.3.8 Results to be obtained
  LOVAG TC LDS130 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.11.5 Verification by test
  LOVAG TC LDS131 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.11.5.1 Test arrangements
  LOVAG TC LDS132 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.11.5.2 Performance of the test - General
  LOVAG TC LDS133 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.11.5.3.3 Outgoing circuits
  LOVAG TC LDS134 2016 2019-07-15 Approved POW IEC 61439-6:2012 G10.3 Degree of protection of enclosures
  LOVAG TC LDS135 2016 2019-07-15 Approved POW IEC 61439-6:2012 G9.2 Temperature rise limits
  LOVAG TC LDS136 2016 2019-07-15 Approved POW IEC 61439-6:2012 G9.3 Short-circuit protection and short-circuit withstand strength
  LOVAG TC LDS138 2016 2019-07-15 Archived POW IEC 60947-2:2016 1.1 Scope and object
  LOVAG TC LDS137 2016 2019-07-15 Approved POW IEC 61439-6:2012 G9.3.2 Information concerning the short-circuit withstand strength
  LOVAG TC LDS139 2016 2019-07-15 Archived POW IEC 60947-2:2016 1.2 Normatives references
  LOVAG TC LDS140 2016 2019-07-15 Archived POW IEC 60947-2:2016 2.17.4 Selectivity limit current (Is)
  LOVAG TC LDS141 2016 2019-07-15 Archived POW IEC 60947-2:2016 4.3.6.3 Standard relationship between short-circuit making and braking capacities and related power factor, for a.c. circuit-breakers Table 2
  LOVAG TC LDS142 2016 2019-07-15 Archived POW IEC 60947-2:2016 4.4 Selectivity categories
  LOVAG TC LDS143 2016 2019-07-15 Archived POW IEC 60947-2:2016 4.5.1 Electrical control circuit
  LOVAG TC LDS144 2016 2019-07-15 Archived POW IEC 60947-2:2016 4.7.3 Current setting of over-current release
  LOVAG TC LDS145 2016 2019-07-15 Archived POW IEC 60947-2:2016 7.1.4 Clearances and creepages distances
  LOVAG TC LDS146 2016 2019-07-15 Archived POW IEC 60947-2:2016 7.1.6 List of construction breaks
  LOVAG TC LDS147 2016 2019-07-15 Archived POW IEC 60947-2:2016 7.2.2.3 Main circuit
  LOVAG TC LDS148 2016 2019-07-15 Archived POW IEC 60947-2:2016 7.2.3.2 Impulse withstand voltage
  LOVAG TC LDS149 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.1.2 Type tests
  LOVAG TC LDS150 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.1 Test sequence
  LOVAG TC LDS151 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.1.3 Applicability of sequence according to the relationship between short-circuit ratings
  LOVAG TC LDS152 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.1.4 Alternative test programmes for a.c. circuit-breakers having a different number of poles
  LOVAG TC LDS153 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.1 General requirements
  LOVAG TC LDS154 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.2.2 Tolerances on test quantities
  LOVAG TC LDS155 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.2.4 Power factor of the test circuit
  LOVAG TC LDS156 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.2.7 Ripple of test current for d.c.
  LOVAG TC LDS158 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.1 General requirements
  LOVAG TC LDS157 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.4 Test reports
  LOVAG TC LDS159 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.2 Test circuit
  LOVAG TC LDS160 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.3 Calibration of the test circuit
  LOVAG TC LDS161 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.4.3 Test on four pole circuit-breakers
  LOVAG TC LDS165 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.2.2 Short-circuit releases
  LOVAG TC LDS162 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.5 Behaviour of the circuit-breaker during short-circuit making and breaking tests
  LOVAG TC LDS163 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.2.6.6 Interpretation of records
  LOVAG TC LDS164 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.2.1 General
  LOVAG TC LDS166 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.2.3 Overload releases
  LOVAG TC LDS167 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.3 Test of dielectric properties
  LOVAG TC LDS168 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.4.4 Operational performance capability without current
  LOVAG TC LDS169 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.3.5 Overload performance
  LOVAG TC LDS170 2016 2019-07-15 Approved POW IEC 60947-2:2016 8.3.3.6 Verification of dielectric withstand
  LOVAG TC LDS171 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.6.3 Rated short-time withstand current
  LOVAG TC LDS172 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.3.9 Critical d.c. load current
  LOVAG TC LDS173 2016 2019-07-15 Archived POW IEC 60947-2:2016 8.4.6 Dielectric tests
  LOVAG TC LDS174 2016 2019-07-15 Approved POW IEC 60947-2:2016 A.6.1 Determination of the take-over current
  LOVAG TC LDS175 2016 2019-07-15 Approved POW IEC 60947-2:2016 A.6.2 Verification of the back-up protection
  LOVAG TC LDS176 2016 2019-07-15 Archived POW IEC 60947-2:2016 B.5 Marking
  LOVAG TC LDS177 2016 2019-07-15 Archived POW IEC 60947-2:2016 J.2.3 Radiated radio-frequency electromagnetic fields
  LOVAG TC LDS178 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.5 Product information
  LOVAG TC LDS179 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.8.3.10 Thermal cycling test
  LOVAG TC LDS180 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.8.3.11 Climatic test
  LOVAG TC LDS181 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.8.3.2 General test conditions
  LOVAG TC LDS182 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.8.3.3÷8 Test sequence I ÷ VI
  LOVAG TC LDS183 2016 2019-07-15 Approved POW IEC 60947-2:2016 P.8.3.9 Critical load current
  LOVAG TC LDS184 2016 2019-07-15 Approved POW IEC 60947-2:2016 R.5 Product information
  LOVAG TC LDS185 2016 2019-07-15 Approved POW IEC 60947-2:2016 Table R.1 Test sequences for independent type automatic re-closing devices
  LOVAG TC LDS187 2018 2019-07-16 Archived IEC 61439-1: 2011 10.9.3.2 Dielectric properties
  LOVAG TC LDS188 2018 2019-07-16 Archived IEC 61439-1: 2011 10.9.3.2 Dielectric properties.
  LOVAG TC LDS189 2018 2019-07-16 Archived IEC 61439-1: 2011 10.11 Short-circuit withstand strength
  LOVAG TC LDS190 2018 2019-07-16 Archived IEC 61439-1: 2011 10.11.5.4 Value and duration of the short-circuit current
  LOVAG TC LDS191 2017 2019-07-16 Approved IEC 62208:2011-08 9.7 Evaluation of the conformity after the IK test
  LOVAG TC LDS192 2017 2019-07-16 Approved IEC 62208:2011-08 9.7 Evaluation of the conformity after the IK test
  LOVAG TC LDS193 2017 2019-07-16 Archived IEC 60947-3:2008+AMD1:2012+AMD2:2015 8.5.1 Special test of mechanical durability
  LOVAG TC LDS194 2017 2019-07-16 Archived IEC 60947-3:2008+AMD1:2012+AMD2:2015 8.3.4.1.6 Special test of mechanical durability
  LOVAG TC LDS 195 2018 2019-07-16 Archived IEC 60947-4-1:2009+AMD1:2012 8.2.2 – Table 5 Temperature rise limits for insulated coils in air and in oil
  LOVAG TC LDS196 2018 2019-07-16 Archived IEC 60947-1: 2007 + AMD1:2010 + AMD2:2014 7.1.5 Actuators
  LOVAG TC LDS197 2018 2019-07-16 Approved IEC 61439-6 10.11.5.1 Short-circuit withstand strenght on BTS: fixing systems
  LOVAG TC LDS198 2018 2019-07-16 Archived IEC 60947-2: 2016 8.3.2.6.4.3 Tests on four-pole circuit-breakers
  LOVAG TC LDS199 2018 2019-07-16 Archived IEC 60947-1: 2007 + AMD1:2010 + AMD2:2014 7.2.3.4 Table 15 Creepage distances
  LOVAG TC LDS200 2018 2019-07-16 Approved EN 60947-3- A2 D.7.2.4.1 (sequence 1) e D.7.2.4.2 (sequence 2) Tests according to Annex A2 of EN 60947-3 (photovoltaic) for the PV2 category
  LOVAG TC LDS202 2019 2019-07-16 Archived IEC 60947-3: 2010+A1:2012+A2:2016 8.3.3.3 Making and breaking capacities Test values and conditions
  LOVAG TC LDS203 2019 2019-07-16 Archived IEC 60947-3: 2010+A1:2012+A2:2016 8.3.3.3 Making and breaking capacities Test values and conditions
  LOVAG TC LDS201 2019 2019-07-16 Archived IEC 60947-3: 2010+A1:2012+A2:2016 8.3.3.3 Making and breaking capacities Test values and conditions
  LOVAG TC LDS204 2022 2023-06-03 Approved IEC 60947-1: 2020 Accessible parts definition/identification